Wrapping Blocks with Fabric

[ChloeGrey]

This post has been copied over from the PACCIN ListServ archives. Our ListServ distributes messages between PACCIN members via email. Members use this valuable resource to pose questions and contribute answers to the PACCIN community. It's free to join! To sign up or to learn more about the PACCIN ListServ, click here.

___________

Original Post Date: 17/1/2016

Hello colleagues,

I need to wrap several exhibition display blocks with fabric. Do any of you have an illustrated or an online video/tutorial on how to best do this. I'm a wiz at wrapping Christmas presents, but when it comes to wrapping blocks withfabric,i stink.

I plan to use Ethafoam (1.7 density) for this project (Objects resting on objects are lightweight).Shouldi add Foamcor or matboard to the bottom of Ethafoam block, as a surface that fabric can be stapled or glued onto?

Many thanks in advance for your advice.

Noel Valentin
Permanent Collection Manager

__________


Hi Noel,

I have never seen a video, but that is a good idea. My advice from some experience with box wrapping is to go with denser e-foam. 4lb or 6lb will give you crisper corners. The low-density stuff will collapse under the fabric tension and will have unsightly rounded edges. Stapling will be easier. You could glue the fabric using Lascaux or one of the other heat bonding glues (filmoplast R, e.g.). Then there are no seams or folded over fabric, just a trimmed corner. I found the results here mixed with some people really excelling at it and others just not able to make it look perfect. (an aside: does anyone know if Stitch-Witchery is archival?)

A lot of the result will depend on the fabric, which should be a balance of weight, weave and give. Surely theses have been written about the best fabrics for object display! You want a middle weight fabric, with a tight weave and some give to stretch it taut. Oddy-tested, maybe. Probably.

My one tip if you are folding and stapling that will give you super smooth sides is to use a rectangle of2-ply board on the flap ends. Hmm, that makes no sense without more explanation! When wrapping a box you are going to attach the fabric across one dimension first, right? Call that the east/west axis. Start in the middle and work out, back and forth across the east and west. Once you have stapled your fabric to the corner, you notice how much extra fabric you have to hide if you wrap it present style. You need to cut off some, fold some under and staple it, right? But that fabric telegraphs through the finish surface. Cut 2-ply board about 1/16” smaller than the size of the north/south ends of your box, lay it down on the fabric and see how it much fabric will need to be cut so that the board is wrapped but covers all the other folded fabric.

As I read this I can see it probably does need a video or photos. If I get time I’ll try to do some and send them along unless someone beats me to it.

Steve Briscoe
Chief Preparator